Product Description

Cuff Detection (CD)

Detects and indicates whether the cuff is wrapped around the arm properly.

Movement Detection

The “Movement Detection” helps reminding the user to remain still and is indicating any body movement during measurement. The specified icon appears once a “body movement” has been detected during and after each measurement.

Real fuzzy Technology

Real Fuzzy Technology determines ideal cuff pressure based on one’s systolic blood pressure and arm size. Users no longer need to pre-set the inflation level before measurement. The technology eliminates arm discomfort through unnecessary high inflation settings and also prevents inaccurate readings caused by erroneous cuff inflation levels.

Features

• Cuff Detection
• Movement Detection
• Hypertension Risk Indicator
• Irregular Heartbeat Detector (IHB)
• Last Number Memory Recall
• One TouchAutomatic Operation
• Latex - Free Patented Universal Cone Cullf (24-40cm circumference)
• Large LCD size: 55 x 63 mm
• String Bag

What is systolic & diastolic?

The two conditions of the heart

1. SYSTOLIC: Muscle is tensed = pumping high blood flow and high pressure in artheries.
2. DIASTOLIC: Muscle is relaxed = no pumping slow blood flow and low pressure in artheries.

What is pulse rate?

The pulse rate is the number of heartbeats per minute

Blood Pressure Standard

Tips to measure accurately

• Avoid any kind of stress before taking measurement (phyiscal, mental, eating, smoking)
• Sit down and relax 5min. prior to taking measurement
• Always take measurement in seated position and at the same arm (usually left arm)
• Make sure not to wear tight sleeves that would compress your arthery and influence blood flow. *Don’t roll up sleeve of your shirt, but take it off or if only thin fabric it can be worn flat on the skin underneath the arm cuff not affecting the measurement
• Adjust the cuff so that it is not too tight or loose
• Do not talk and move when taking measurement
• Do not cross leg and breathe gently when taking measurement
• Conditions at home should be the same for everyday reading

Tips to measure accurately-Correct Posture

Quick Guide

1. Unwrap the arm cuff. Put your left arm through the cuff loop. The color strip indication should be positioned closer to you with the tube pointing in the direction of your arm.
2. Turn your left palm upward and place the edge of the arm cuff at approximately 1.5 to 2.5 cm above the inner side of the elbow joint .Tighten the cuff by pulling the end of the cuff.
3. Center the tube over the middle of the arm. Press the hook and loop material together securely.
4. Allow room for 2 fingers to fit between the cuff and your arm. Position the artery mark (Ø) over the main artery (on the inside of your arm).
5. Plug in the cuff connecting tube into the unit.
6. Lay your arm on a table (palm upward) so the cuff is at the same height as your heart. Make sure the tube is not kinked.
7. This cuff is suitable for your use if the arrow falls within the solid color line as shown. If the arrow falls outside the solid color line, you will need a cuff with other circumferences.
8. Press the ON/OFF/START key. Measurement will then begin.

Blood Pressure Standard

Refer to the definition of the World Health Organization, the blood pressure ranges can be classified into 6 grades. (Ref. 1999 WHO-International Society of Hypertension Guidelines or the management Hypertension). This blood pressure classification are based on historical data, and may not be directly applicable to any particular patient. It is important that you consult with your physician regularly. Your physician will tell you your normal blood pressure range as well as the point at which you will be considered at risk. For reliable monitoring and reference of blood pressure, keeping long-term records is recommended. Please download the blood pressure log at our website www.rossmax.com.

Measurement Procedures

Here are a few helpful tips to help you obtain more accurate readings:

• Blood pressure changes with every heartbeat and is in constant fluctuation throughout the day.
• Blood pressure recording can be affected by the position of the user, his or her physiological condition and other factors. For greatest accuracy, wait one hour after exercising, bathing, eating, drinking beverages with alcohol or caffeine, or smoking to measure blood pressure.
• Before measurement, it's suggested that you sit upright (900) and quietly for at least 5 minutes as measurement taken during a relaxed state will have greater accuracy. You should not be physically tired or exhausted while taking a measurement. Make sure that the arm is same level with the heart when during take measurement in order to obtain more accurate readings.
• Do not take measurements if you are under stress or tension.
• During measurement, do not talk or move your arm or hand muscles.
• Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it.
• Wait 5 minutes before taking the next measurement.

Remark: Please consult doctor for interpretation of results

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.