Features

Particle size created by our VAT bottle is around 2.262μm(MMAD) tested by Cascade Impactor. Compared to most bottles in the market, our proprietary bottle ensures more efficient and effective performance.

• MMAD ≤ 2.5 μm; Fine Particle Dose (FPD): 80-85%
• Consistent fine particle size for efficient respiratory treatment
• Compact size (14 x 10 x 7 cm)
• Patented Valve Adjustable nebulizer bottle (VAT)
• Very low noise with silencer and vibration-absorber design
• Mouthpiece and masks for adult and child included
• Built-in nebulizer kit holder
• 12V adaptor included

Valve Adjustable Technology| VAT - Valve control nebulization rate

With the adjustable bottle for flow rate control, the delivery of any mediation will be fast and efficient. The Valve Adjustable Technology (VAT) is based on different levels of flow rate (0.2 – 0.4 CC/min). The flow rates can be adjusted by the user in a very easy way without exchanging parts. High flow rate is for high viscosity medications and high breathing capacity user whereas the low flow rate is recommended for children or infant.

Thanks to the reduction of wasted medication, VAT is also recommended for severe respiratory disorders such as COPD and Asthma as well as intensive use in general.

Low Noise | with silencer and vibration absorber

• Possibly the lowest dB value among the compressor nebulizers. All the noise and vibrations are significantly reduced via the unique silencer and vibration-absorber design.
• The compact design with optimal heat dissipation system allows durable, powerful operation.

Neb Tester

The Rossmax Neb Tester is a portable and easy-to-use device that allows the user to quickly check the performance of the pump of a compressor nebulizer. No power source is required for the Neb Tester to operate and the test result is easy to read and interpret. This device is used to simulate the working conditions of the pump when the nebulizer is in operation with a medication cup. For checking:

• Maximum (“free”) air flow
• Operational air flow at particular pressure
• Maximum air pressure

Why choose Rossmax Nebulizer?

• Consistence of fine particle size (MMAD ≦ 3.0μm, FPD=80~85%)
• Adjustable Neb rate (from 0.1cc/min to 0.5 cc/min) –Patented VAT Technology
• Lower residual volume (<0.65cc)
• Capability for nebulizing higher viscosity medications
• Silencer design - reduces 5~7 dB and quiet
• Ventilation design – reduces working temperature and increases the working time and pump life

Specification

• Air tube
• Air filters
• Instruction manual
• Masks
• Nebulizer kit, mouthpiece

Quick Guide

How to use nebulizer NB80

Assembling your nebulizer kit

Follow the cleaning instructions in this guidebook under “Cleaning technique” prior to using your nebulizer for the first time or after it has been stored for an extended period of time.

REMEMBER: Always unplug the compressor and make sure the power-switch is turned to the “OFF” position before cleaning, assembling and before or after each use.

1. Place the compressor on a flat, stable surface within reach.
2. Gently twist and pull straight up on the lid of the nebulizer to separate into two parts (medication cup and cover).
3. Make sure that the nozzle is properly installed inside the medication cup. The stem inside the medication cup inserts into the tube of the nozzle.
4. Add the prescribed amount of medication to the medication cup.
5. Reassemble the nebulizer by carefully twisting the medication cup and cover together.
6. Make sure that the two parts fit securely.

Operating your nebulizer

1. The nebulizer is operable at up to a 45° angle. If the angle is greater than 45°, no aerosol will be generated.
2. Attach one end of the air tube connector to the air output.
3. Carefully attach the opposite end of the air tubing connector to the stem at the base of the nebulizer kit.
4. Attach the angled mouthpiece or mask to the top of the nebulizer.
5. The capacity of the medication cup is 2~5 ml.

Note: A 30-minute interval is recommended after each use.

Steps of keeping your nebulizer

After every use

1. Unplug the unit from the power source.
2. Allow the unit to completely cool.
3. Carefully detach the air tubing from the nebulizer and pour out any remaining medication.
4. Follow the cleaning procedures provided in this guidebook.

Cleaning Procedure

1. Rinsing technique (performed after each treatment or before first use).
2. Make sure that the power-switch has been turned to the “OFF” position and the unit has been disconnected from the power source.
3. Disconnect the air tube from the nebulizer device.
4. Gently twist and pull up the cover of the nebulizer kit to open and separate.
5. Rinse the nebulizer kit and components with hot tap water.
6. Dry with clean towels or completely air dry.
7. Reassemble the nebulizer kit.

Note: For the first time cleaning or after the unit has been stored for an extended period of time, thoroughly clean all components, including the air tube. The nebulizer kit is dish-washer safe.

Cleaning the compressor

Wipe the compressor daily using a soft cloth.

Note: Any other form of cleaning or cleaning agents may damage the finish of the unit.

Changing the air filter

It is important to change the air filter approximately when the air filter turns gray. It is recommended to change air filter every 2 months.

1. Remove the air filter cover by gently pulling forward.
2. Discard the gray filter.
3. Replace with a new, clean air filter.
4. Securely re-attach the air filter cover to the unit.

Note: Air filters cannot be cleaned or washed. Only NB80 air filters can be used. Do not substitute alternate material such as cotton. Do not operate without an air filter.

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.