Product Description

Roborock Saros 10 Refill and Drainage

Key Features

• Obstacle Avoidance System  
• Auto-Lifting Mop  
• FlexiArm Riser Design Side Brush  
• Concealed Scrapers Design for Main Brush System  
• DuoDivide Brush  
• Detachable Main Brush  
• Lifable Main Brush  
• Floating All-Rubber Brush  
• Dynamic-speed Side Brush  
• Electronic Water Tank  
• Carpet Detection  
• Carpet Boost Mode  
• Soft Rubber Padding  
• DirtDetect  
• Customizable Room Cleaning  
• Automatic Room Recognition  
• Room Naming  
• Selective Room Cleaning
• VibraRise® 4.0 Mopping System
• Extra Edge Mopping System
• Automatic Disassembly Mop

The Thinnest Roborock to Make a Big Difference

7.98cm Ultra-Thin Design The RetractSense Navigation System lowers its LDS to pass under low-clearance areas and rises again in open spaces, all while featuring Roborock's slimmest design yet. This system is built to last, with a design lifespan of tens of thousands of cycles and thousands of hours of rigorous factory testing, giving you peace of mind about its durability.

Meticulous LiDAR, More Than Simply Rising and Retracting

Clear Vision, Even When LiDAR Is Retracted

The Wide-Angle Vision Module allows the LDS sensor to maintain a broad field of view even when lowered, preventing mapping loss and ensuring smooth navigation through low-clearance areas.

Clever Decisions, Even in Challenging Spaces

The Upward Range Finder accurately measures space height, directing the LDS to lower at the right moment to pass through low-clearance aras and promptly raise after exiting, ensuring smooth mapping without lag or map loss.	The Top Contact Sensor can detect inclined low-clearance spaces in real time, making smart decisions even at critical heights to avoid forcing entry, reducing the risk of surface scratches.

AdaptiLift Chassis Overcome Barriers, Expand Possibilities

Up to 4cm /1.57 threshold clearance inches

With up to 4cm /1.57 inches threshold clearance, Roborock Saros 10 easily navigates over doorways and small obstacles, pioviding uninterrupted cleaning across different rooms and surfaces.

Hair Tangling?

Divide and Conquer

VibraRise 4.0 Mopping System

Enhanced, in Pretty Much Every Way

Mop, Unclip!

The vibrating mop of Saros 10 automatically detaches when operating a Vacuum Only. Vacuum Carpet Fast. Quick Mapping, Cruise, and Search lor Ihe Pel. ensuring long-pie carpels slay as dry as possible.

Larger, Harder, Smarter

The VibraRise 4.0 Mopping System features a denser, more absorbent towel that locks in moisture for effective stain removal. Dual sonic vibrating zones at 4,000 times/min each, up to 8N pressure, and a 27% larger vibration area ensures superior mopping performance.

Side Mop Independent Lifting The edge mop con now independently lift (rom the main mop, lowering only when detecting edges to ensure optimal edge-cleaning performance. 27% Larger Mop VlbiflUng Aiea Up to Downward Mopping Pleasure Up to 220 RPM Side Mop Speed
Mop Again Harder for Stubborn Stains When activated in Al Laboratory via the Roborock App. Soros 10 detects wet stains like coffee spills, lifts its omni wheel, and applies extra pressure with the mop for a deeper, immediate clean.
Edge-to-Edge Coverage 100% Edge and Comer Coverage <1 mm Mopping Along the Edge

Adaptive Elevation for Spills and Carpets

Adaptive dry-wet separation for precise cleaning: the side brush, main brush, and dustbin stay dry, while the mop avoids carpet to prevent any risk of re-wetting.

Reactive AI 3.0 Obstacle Recognition

Quadruple, Exceptional Saros 10 features an advanced perception system with front triple structured light, an RGB camera, and VertiBeam lateral structured light. It offers a wider obstacle-avoidance view, minimal blind spots, and clear detection near and far with swift response.
Clean Close VertiBeam lateral obstacle avoidance precisely measures the distance between the robot and side obstacles, ensuring accurate edge cleaning along furniture and objects.

Adaptive Elevation for Spills and Carpets

Adaptive dry-wet separation for precise cleaning: the side brush, main brush, and dustbin stay dry, while the mop avoids carpet to prevent any risk of re-wetting.

RockDock Ultra 2.0

Clean Deeper, Charge Faster

The RockDock Ultra 2.0 blends sleek design with practical convenience. It features an AG-treated tempered float glass lid that opens with a simple press, while the dust cover on the water tanks ensures lasting cleanliness.

80°C Dynamic Mop Washing The RockDock Ultra 2.0 adaptively uses water at different temperatures to tackle various stains on the mop. It prevents starch-based stains from becoming sticky, melts oil stains at higher temperatures, and finishes with high-temperature sterilization for thorough hygiene.
One Step Ahead in Fast Charging RockDock Ultra 2.0 fully powers a 6400mAh battery in just 150 minutes. The dock intelligently adjusts the charge needed based on the remaining area, so you don't need to watt until it's fully charged.

The Quietest Roborock Yet

Thanks to Roborock's latest noise reduction technology. Saros 10 operates with the lowest sound levels of any Robotock model. In Roborock SmartPlan, it automatically reduces power and noise during Do-Not-Disturb periods for a quieter experience.

• 52 dB(A) Quiet Mopping Mode
• 72 dB(A) Dock Self-Emptying

Easy-to-Use App Tap. Tap. Clean.

Roborock SmartPlan 2.0

Mindful of Details You Might Miss

Roborock Saros 10 Intelligently Identities floor types and room categories, customizes the optimal cleaning strategy based on each area and past cleaning habits.

No Internet?

No Worries, It Still Works

Even when offline-whether your home internet is down or the app isn't connected-you can still control the robot using voice commands. Of course. Saros 10 also supports smart home systems like Google Home and Amazon Alexa.

Your Privacy Matters, As Always

Saros 10 Is also TUV Rhelnland certified, meeting the ETSI EN 303 645 standard for data security.

What's in the Box

• Robot Vacuum (1)
• Multifunctional Dock (1)
• Dock Base (1)
• Disposable Dust Bag (1)
• Power Cable (1)
• Rotating Mop Module (2)
• User Manual (1)

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.