Product Description

Direct drinking bottle for quick hydration. Easy to carry with dedicated pouch

Easy one-handed opening Safety lock included

(Drink Directly) Open the lid and drink directly

(OK to wash) The main unit can be washed completely (*Do not leave it in water).

• Size (W x D x H): Approx. 3.7 x 3.7 x 12.8 inches (9.5 x 9.5 x 32.7 cm); Diameter: 1.8 inches (4.5 cm); *Not including pouch
• Materials: Body: Stainless steel (SUS304), Stopper: Polypropylene, Gasket: Silicone
• Country of Origin: China
• Practical Volume: 0.4 gal (1.5 L)
• Cold Retention: 6 hours/15.4°F (7°C)
• For cold insulation only. Drinking directly
• Fully washable
• Includes dedicated pouch
• For cold insulation only

One-touch opening

Comes with a safety lock for easy carrying.

Just open the lid and drink as is. 

The main unit is fully washable.

Care Instructions:

After using, be sure to care for it on the same day.

When cleaning, do not use anything other than soft sponges.

To prevent odor, please care frequently.

(Exterior/Stopper Set/Spout Set)

Wash the main unit, stopper set, and drinking spout set thoroughly with warm water or water, then immediately wipe off the moisture with a dry cloth. *Do not wash it.

[Inside the body]

Clean the interior with a sponge brush and dry thoroughly.

Washing:

Remove the gasket from the stopper or mouth, wash it thoroughly with warm water or water, then wipe it off with a dry cloth.

Care Instructions:

Do not use bleach (may cause damage to rust, punctures, etc.).

Do not use thinner, benzene, metal scrubbers, pollen, cleansers, chemical pesticides, or other cleaning products other than kitchen products (which cause damage to scratches, rust, etc.)

Do not use a washing machine or dish dryer or a dish dryer or other product (causing damage to scratches, rust, deformation, or spill).

• The main unit can be washed, but do not wash it (leave it in water).
• After washing the main unit, always wipe away moisture (if you do not wipe it off, it may leave water droplets or stain rust or other items).

When not in use for a long time, please clean it carefully, remove dirt, dry thoroughly and store away from high temperatures and humidity.

Care for Red Rust Speckles and Water Stains etc.

During use, water quality and impurities may cause red rust spots on the inside of the main unit and water scale to adhere to.In such cases, please follow the following steps

1. Add about 10% citric acid to boiling water with a constant amount of water.
2. After about 3 hours, please clean the inner surface with a sponge brush with a handle and rinse thoroughly.
3. Dry thoroughly

Please take care of this product before use or if anything other than water is used with tea or sugar content before use.Prevents odors and can be used cleanly.When cleaning with other items, be careful not to scratch the product.

Remove the stopper unit.

Rotate the unit from the body in the direction of the arrow to remove it.

Fill with cold drinks

• Fill with cold drinks to ensure the stopper stays securely in place
• If you prefill a small amount of cold water in advance and prechill for about 1 minute, it will be more effective
• The amount of drink should be measured to the position of the image.
• If you fill the drink too much and close the stopper unit, the drink may blow out or come out from later.If you fill too much, discard a small amount of liquid and then close the stopper unit as it reaches

Tighten the screw unit.

With the lid closed, turn the stop unit in the direction of the arrow.

Open the lid to drink

• Lift the safety lock with the product upright
• Press the button to open the lid and slowly tilt to drink drinks.

Easy to fill with ice cubes.

Diameter: Approx. 1.8 inches (4.5 cm).

With a diameter of about 1.8 inches (4.5 cm), it is easy to insert ice cubes.

Comes with a dedicated pouch.

Comes with a shoulder strap for convenient carrying.

Precautions

The protective sticker attached to the bottom of the main unit will never be removed.

If you remove it, the thermal effect will decrease if the effect of heat preservation.

The product can be placed horizontally.

It can be pulled

Will not be exposed to strong impact such as falling, dropping, or bumping.

Breakage, heat retention (cold insulation) may decrease the effect, rust, paint peel, and drink may fall off.

Please be careful when storing hot drinks.

With its thermal insulation, the outer body will not get hot even when filled with hot items.

Keeps hot kettles from touching the bottle mouth.

It may cause burns or falls.Causes of scratches, deformation

If you keep hot tea hot for a long time, the color of the tea will change, so you can use a tea bag when you go out.

Keep your tea warm and change the color and flavor of your tea.This is because the tea ingredients change with time and is harmless to the human body.

If you put a hot drink and leave it for a long time, the interior will decompression, making it difficult to open the set or when opened, there may be some noise.

When using with hot beverages, please slowly tilt to drink.

If you tilt it suddenly, the drink will be generated and may cause burns.

Do not shake immediately after hot drinks.

The internal pressure increases rapidly, making the set difficult to open up, or when you open it, there may be some noise.

If you want to add large ice, please make it smaller and put it inside.In addition, it will not poke with sharp objects such as ice pigs.

This may cause damage to scratches, stains, deformation, etc.

The mouth set is sure to be securely installed.You can also use the set with the use of the stopper.

May be burned or burned.

Use with a spool washer and mouth washer alone.

It may cause burns, etc.Doesn't stain your car or your clothes

Do not carry a set of stoppers.

Do not leave the pen close to your face while tilting it.

When filled with boiling water, the hot water will suddenly disappear, or it may cause burns.

When placing in a bag, etc., the main unit should be kept vertically.

In case of leakage, always put it vertically

Cannot be carried with precision machinery such as computers, mobile phones, digital cameras, etc.

In the event that there is a risk of damage to the precision machine.

Do not use while driving automobiles.

It can cause burns and dirt in your car and clothing.Drivers can distract you from driving and dangerous.

When using with automobile tin holders.

1. Check the strength before using.If it is not strong enough, it may cause the tin holder to fall off, break, or burn.Doesn't stain your car or your clothes
2. Commercial can holders use a stationary type.Do not use the hanging type to attach to windows or air conditioner vents as the holder may come apart.

Does not modify or disassemble repairs

Causes of failure or accidents

Do not put in the freezer.

It may cause leakage or other malfunction.

Do not heat in a microwave.

Spark flying hazard.The cause of deformation and deformation

5 years warranty on manufacturing defects

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.