Product Description

Ethernet Smart Managed Pro PoE Switch

As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high-performance networks that are SMB budget aware. With the growth of virtualization, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to performance and security.

The NETGEAR S350 Gigabit Smart Managed Pro Switch series is tailored to these essential network needs of your business; delivering unprecedented non-blocking Gigabit bandwidth and solid network security at an affordable cost.

Features

Management

Traffic Management

• Auto Negotiation of speed and duplex modes
• IEEE 802.3x Flow Control
• Dynamic MAC address management
• IEEE 802.1Q-based VLAN
• Auto Voice VLAN
• Auto Video VLAN
• QoS based on WRR, strict priority, or both
• Port-based and IEEE 801.2p-based QoS
• TCP/UDP-based QoS
• DiffServ
• DSCP Support
• Rate Limiting (ingress, or egress)
• Link Aggregation and LACP

Switch Management

• Web browser-based management GUI
• Smart Control Center Software for multi-switch management
• IP Access List
• Configurable Management VLAN
• SNMP v1/v2c and v3
• Standard MIBs (RFC1213, RFC1643, and RFC1493)
• RMON group 1, 2, 3, 9
• Firmware Upgrade through Smart Control Center (TFTP)
• Firmware download (to switch) and upload (to server) through TFTP/HTTP
• Configuration and Image Upload (to PC) through HTTP
• Configuration Download (to Switch) thru TFTP/HTTP and upload (to server)
• Memory & FLASH log
• Syslog (server)
• System password protection
• Registration through NETGEAT Insight App

Multicast Efficiency

• IGMP snooping, v1, v2 and v3
• IGMP Snooping querier
• Blocking of unknown multicast traffic

Spanning Tree, Routing and Stacking

• IEEE 802.1D Spanning Tree Protocol (STP)
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

Security

• MAC lockdown
• MAC lockdown by number of MACs
• IEEE 802.1x port authentication EAP
• Dynamic VLAN Assignment
• Guest VLAN
• TACACS+
• 3 HTTPS /SSL versions (Selected models)
• TLS session
• Trusted MAC
• IPv4, L4-based Access Control List (ACL)

Reliability

Reliability, Performance and Troubleshooting 

• Port mirroring both on ingress and egress traffic
• Jumbo frame support
• Broadcast Storm control
• Cable diagnostics
• Loop Detection
• DoS Prevention
• IEEE 802.1ab LLDP
• LLDP-MED
• Dual Image
• SNTP
• Option to enable/disable the flooding of EAPOL when 802.1x is disabled
• Protected ports
• DNS client
• DHCP clients
• DHCP snooping
• Ping and traceroute client
• Energy Efficient Ethernet (IEEE 802.3az) compliant

Specification

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.