Product Description
Watts LED Strip Lights 5M LEDS Set SMD 5050 RGB IP65 Waterproof with 44 Keys IR Remote Bluetooth Controller
A perfect & creative illumination for all occasions including
- Landscape illumination & amusement themes
- Festive light sculpture, decorative figure, active signages and displays
An ideal lighting for your live streaming by setting up the perfect colour tones for the backdrop
About the LED Strip Light
- LED Type: 5050 SMD
- Color: RGB
- LED Quantity: 30 LEDs / Meter
- Protection Class:Waterproof
- Operating Voltage: DC 12V (2-pin plug)
- Working Current:: 5A
- Power: 12W / Meter
- Viewing Angle: 120-degree
- Operating Temperature: -20 to 50°C
- Size: L500cm (5M) × W1.00cm x T0.25cm
- Source Life: > 50,000 hours
- Length: 5m per roll
About the 44 Key IR Remote Controller
- Connection mode: Common Anode(+)
- Input: 12V / Output: 12V
- Max load current:2A each color
- Working Temperature: -20°C-60°C
- Control box dimension: 50mm x34mm x22mm
- Remote controller dimension: 124mm x 56mm x 6mm
- Remote controller battery 3V: 1 x CR2025
- On: Turn on Power.
- Off: Power off.
- Up: increase brightness.
- Down: decrease brightness.
- R: change color to red.
- G: Switch to green color.
- B: change color to blue.
- Flash: color changing automatically, quickly jump.
- Strobe: automatically change color, gentle jump.
- Fade: automatic color change, gradually move quickly.
- Smooth: automatic color change, gradually move smoothly.
- 8 Light Pattern: Quick / Slow / Auto / Flash / Fade7 / Fade3 / Jump7 / Jump3.
- 6 DIY keys for save the colors that you prefer
About 12V 5A LED Adapter
- Universal Input 100-240V AC 50/60Hz;
- 100% full load burn-in test and all using 105ºC long life electrolytic capacitors.
.jpg)
Arrow to Arrow
.jpg)
Wrong way
.jpg)
Pointing at the sensor
.jpg)
.jpg)
Arrow to Arrow
.jpg)
Every 3 LED can be cut, along the cutting line
.jpg)
Pointing at the sensor without any obstacles, 5m sensing distance
.jpg)
Remove the plastic piece before use

.jpg)
Remote Controller
High Quality and Easy To Use.

The new infrared receiver is getting bigger than the old one, it can expend the receive angle to give you more great experience.

Arrow to Arrow
.jpg)


Emitter aims at receiver

How To Connect The LED Strip Lights
.jpg)
3M sensing distance
.jpg)
DC plug
.jpg)
The arrow must be connected at the same level
.jpg)
Remove the plastic piece before use

Sponge adhesive

Cuttable light strip
