Bambu Lab A1

• Full-Auto Calibration: Absolutely no manual tuning.
• Seamless Multi-Color Printing (Combo Version): Experience limitless creativity with AMS-powered material handling.
• 49dB Whisper-Quiet Operation: Print in peace with a noise level as low as a quiet library.
• Best-In-Class Print Quality: Pro-grade precision & surfaces that set the industry standard.
• One-Click MakerWorld Integration: Find your next project and start printing instantly.
• Full-Scale Build Volume: A spacious 256 × 256 × 256 mm³ canvas for your big ideas.
• The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.

A Colorful Gateway to 3D Printing

See What You Can Do With A1

Highlight Overview

AMS lite Print Multi-Color	Full-Auto Calibration No Manual Adjustment
Active Flow Rate Compensation Smooth At Every Corner	High-Speed Precision 10000 mm/s² Acceleration
Print Silently Silent Mode Under 48 dB	Reliability Bambu Lab Quality You Can Trust
MakerWorld Start Printing With A Single Click

Auto Filament Loading

Full-Auto Calibration

Goodbye to Tedious Manual Calibration And Tuning

A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Auto Bed-Level

Auto Z-Offset

No More "Paper Method"

A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.

Auto Vibration Calibration Auto Tune Both X & Y Resonance Before Every Print A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Auto Flow Dynamics Fully Automated PA (Pressure Advanced) Calibration First of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 handles Pressure Advanced calibration automatically.

Auto Belt Tension

Auto Monitoring And Adjusting The Belts

A1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.

Auto Filament Loading

Full-Auto Calibration

Load/Unload Filament With One Touch

No manual setting involved, A1 fully automated the filament load/unload process.

Swift Maintenance

Quick Swap Nozzles

All-new quick swap hotend design, the hotend pops in and out with just 1 clip. 

AMS lite

Multi-Color Printing For Everyone

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

Print Smooth At Every Corner, Always

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High-speed Precision

Bed Slinger with CoreXY Speed And Quality

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Intuitive UI

As Easy As Your Smart Phone

A1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have to be a 3D printing expert to use the A1.

Worry-free Printing

Start and Relax

Bambu Lab printers are well known for the worry-free printing experience that has been widely praised by our fantastic userbase. Check out what our users have to say about our printers on the market!

MakerWorld

1-Click Away From Printing

Introducing MakerWorld, the next-gen 3D model platform with 1-click printing straight from the Bambu Handy App. In addition to this new platform, you can always use Bambu Studio and Bambu Handy App to manage your printers anytime, anywhere.

Print Silently

Active Motor Noise Canceling

Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB making A1 one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.

Reliability

All-Metal Frame, Bearings and Rails

We spent extra to bring you the most reliable All-metal rails and cover protected drive system. You get Bambu Lab performance out of the box, designed for consistency and longevity.

Privacy

Camera Lens Cover

Forget about the sticker, physically block the camera with a simple mechanism.

Privacy

Easy To Use Off The Internet

If you do not like the concept of Cloud printing, you can use LAN mode for remote control / live view and send jobs to your A1 without the need for cloud communication.

Comprehensive Filament Monitoring

Everyone knows that a clogged nozzle or a tangled spool of filament can ruin an entire fine print.Traditional filament run out sensor can only cover a limited number of failure scenarios. In the A1 and AMS lite, we have introduced a comprehensive filament monitoring system. This includes a filament tension sensor on the toolhead, a filament position sensor before the extruder, and a nozzle pressure sensor situated between the extruder and the nozzle. Additionally, the AMS lite is equipped with a filament odometer. These sensors, combined with advanced algorithms, can promptly detect potential issues such as filament tangling and breakage, and extruder skipping, safeguarding the quality of each print.

All-metal Rail System

The rails are the most important factor affecting the lifespan and accuracy in 3D printers, as they need to ensure the system's rigidity during the printing process, while constantly withstanding the wear brought by high-speed motion. The A1 utilizes all-metal rails, incorporating high-quality linear rail on the X axis, twin all-metal linear rods on the Z axis and a twin row all-metal linear guide on the Y axis. These rail systems ensure that the A1 doesn't require frequent adjustments by the users; regular lubrication alone can guarantee the printer's precision and lifespan.

Active Vibration Compensation

Active Vibration Compensation, similar to Input Shaping found in other firmwares, is the key to fast printing. To compensate for the vibration of the printer, the control system needs to know the vibration characteristics of the system, such as the natural frequency and amplitude of all axes. You can set the parameters when the printer is produced and adhere to them. However, these parameters may drift due to environmental temperature fluctuations, changes in belt tension, or even variations in the mass of the build plate. To guarantee the optimal parameters for superior print quality, we have installed sensors on both the toolhead and the heatbed, allowing for the measurement of the parameters of the X and Y axes before every print.

Full-Auto Leveling

The A1's full-auto ABL uses nozzle as the probe, which measures absolute distance. Bed leveling is fully automatic with zero manual adjustment needed.

Active Motor Noise Canceling

The stepper motor tends to be noisy, particularly at high speeds. By using the motor drive to inject specific high-frequency movements into the motor, we can negate a substantial portion of the noise, provided we understand the detailed characteristics of each motor. However, every motor has its own unique noise fingerprint. The A1 is equipped with sensors and algorithms capable of identifying the minute individual differences in each motor during calibration. This information is then utilized to cancel out a portion of the noise generated by the motor.

RFID Sync

While AMS lite is compatible with most filaments brands on the market, it uses RFID to detect Bambu Filament with RFID tag, and automatically apply the best suited settings for them. It also enable you to monitor the filament usage, remotely.

Real-time Monitoring

You can remotely control and monitor your A1 with the Bambu Handy App or Bambu Studio. You can see what's going on even if you're not on site.

Active Flow Rate Compensation

Unlike the linear and Newtonian movement of the XYZ axes, the viscous flow of the melted plastic is non-Newtonian. The amount of plastic pushed into the hot end by the extruder doesn't necessarily equate to the amount flowing out of the nozzle, especially at high accelerations. This discrepancy can lead to swollen corners and artifacts where the speed changes. This is where active flow rate compensation comes into play. It helps to predict and adjust the flow of the molten plastic, facilitating more accurate extrusion. Previously, we used to print straight lines with acceleration and measure the line's width to calibrate the parameters for compensation - a process that was time-consuming and wasted space on the build plate. In the A1, we employ a novel method to measure the nozzle pressure, allowing us to directly obtain the necessary parameters before each print, saving time and preserving build plate space.

What's in the box

1. Payment with a Maybank Card or Redemption of TreatsPoints/Membership Rewards Points in www.maybank.com/mytreats is only available for Maybank2U account user, if you have not registered as a Maybank2u account user, click HERE to learn how to register your Maybank2U account.
2. Start browsing and selecting the items that you wish to redeem.
3. Click the "Add to Cart" icon to add more items to your shopping cart.
4. For immediate checkout, please click "Redeem now" or you may select "Redeem More" if you wish to continue shopping.
5. At Shopping Cart, once you click ‘Proceed to Redeem”, you will be requested to login your Maybank2u account for payment and points redemption.
   1. Redeem with Full Points:
      1. At “Available Points”, Choose to redeem using TreatsPoints or Membership Rewards Points. Available points balance will also be displayed.
      2. Click “Continue” to proceed check out.
   2. Redeem with Partial Points (Points + Card) [*Not applicable for Air Miles redemption]
      1. Input preferred number of points at “Points to Redeem”, balance amount to pay will be auto calculated and display at “Balance to Pay”.
      2. At “Pay from”, select preferred card to pay for the balance amount.
      3. Click “Continue” to proceed check out
   3. Full Payment with Card [*Not applicable for Air Miles redemption]
      1. At “Pay from”, select preferred Card to pay for full amount.
      2. Click “Continue” to proceed check out
   4. EzyPay Instalment with Credit Card (Note: For minimum charge to card amount of RM500, not applicable to Charge or Debit cards) [*Not applicable for Air Miles redemption]
      1. Select preferred Card at “Pay from”,
      2. “Tick” on Apply Maybank EzyPay (Note: this option will automatically available with minimum RM500 at “Balance to Pay”
      3. Select Tenure of instalment
      4. Click “Continue” to proceed check out
6. Upon selecting “Continue”, delivery address will be auto-populated as per Maybank2U Credit/Debit card billing address. Please ensure delivery address information is in order, including contact number and email address. You may edit delivery address if require to deliver to alternative address.
7. A Transaction Authorized Code (TAC) will be sent to you via SMS to authorize the redemption transaction.
8. Key in the TAC Number and click Confirm.
9. Please allow a few seconds for the redemption transaction to be processed.
10. Upon successful redemption, logout and close the Maybank2U page.
11. The order is now completed and you may print a copy of the receipt as record of the redemption made and to track the delivery of the items redeemed.
12. You will also receive an Order Confirmation via email.